Chromatik PLA 1.75mm Filament - Grey Glitter (750g)

24.99

In stock
Delete

This grey coloured reel is available in 750g.

Filament specificities

Material
PLA
Grammage
750gr
Recommended tray
Non-textured PEI
Print speed
From 30 to 80mm/s
Extrusion temperature
From 210 to 260°C
Temperature of the tray
From 50 to 70°C
Filament information
Brand
Chromatik
Material
PLA
Difficulty in printing
easy
Filament colours
-
Grammage
750gr
Properties
-
Delivery time
-
Printing advice
Recommended nozzle(s)
0.4mm
Recommended nozzle type(s)
Steel
Recommended tray
Non-textured PEI
Type(s) of tray(s) supported
Buildgrip, Geckoteck COLD, Geckoteck HOT, PEI textured
recommended extrusion temperature
From 210 to 260°C
recommended tray temperature
From 50 to 70°C
Recommended print speed
From 30 to 80°mm/s
Retraction distance
From 3 to 4 mm
Flux filament % (%)
100
Shrinkage speed
36
Ventilation % of total
80 / 100

We consider the printing of the Chromatik PLA 1.75mm - Grey Glitter Filament (750g) to be fairly easy.

We recommend using the non-textured PEI tray, but this filament can also be printed on Buildgrip, Geckoteck COLD, Geckoteck HOT, textured PEI tray(s).

For successful printing, we recommend :

  • a print speed of between 30 and 80mm/s,
  • an extrusion temperature between 210 and 260°C .
  • and a plateau temperature between 50 and 70°C

  • TDS
    no associated data sheet
    -
    SDS
    no associated safety data sheet
    -
    Use :
    A filament that is often used to create aesthetically pleasing parts and to validate your designs. Chromatik PLA filament gives you the freedom to customise your 3D prints quickly and easily. It offers a variety of colour options to bring your prototypes to life. It is perfect for aesthetic models or parts for functional design applications.
    Chromatik is Dagoma's filament range. With more than 40 colours, this high quality filament is tested and approved for our Dagoma PROFESSIONAL AND HOME 3D printers.