Chromatik Pro PETG 1.75mm 750g Anthracite Grey Filament

IMG 1956 scaled
toto
IMG 1960 scaled

Chromatik Pro PETG 1.75mm 750g Anthracite Grey Filament

24.99€

Order your filament

You wish to order Chromatik Pro PETG 1.75mm 750g Anthracite Grey filament

The filament Chromatik Pro PETG 1.75mm 750g Anthracite Grey is available to order. We can deliver it within 30 days
This site is protected by reCAPTCHA and the GooglePrivacy Policy and Terms ofUse apply.

This charcoal grey coloured filament spool is part of our PRO filament range. A PETG filament, it is very popular in the 3D printing world as it has good heat resistance and is relatively easy to print.

Filament specificities

Material
PETG
Grammage
750gr
Recommended tray
Geckoteck HOT
Print speed
From 30 to 70mm/s
Extrusion temperature
From 240 to 255°C
Temperature of the tray
60 to 70°C
Filament information
Brand
Chromatik Professional
Material
PETG
Difficulty in printing
easy
Filament colours
Grey
Grammage
750gr
Properties
-
Delivery time
30 days
Printing advice
Recommended nozzle(s)
0.4mm
Recommended nozzle type(s)
Steel
Recommended tray
Geckoteck HOT
Type(s) of tray(s) supported
Geckoteck COLD, non-textured PEI, textured PEI
recommended extrusion temperature
From 240 to 255°C
recommended tray temperature
60 to 70°C
Recommended print speed
From 30 to 70°mm/s
Retraction distance
From 2 to 3 mm
Flux filament % (%)
100
Shrinkage speed
30-40
Ventilation % of total
0 / 20

We consider the printing of the Chromatik Pro PETG 1.75mm 750g Charcoal Grey Filament to be fairly easy.

We recommend the use of the Geckoteck HOT tray, but this filament can also be printed on the Geckoteck COLD, PEI non-textured, PEI textured tray(s).

For successful printing, we recommend :

  • a print speed of between 30 and 70mm/s,
  • an extrusion temperature between 240 and 255°C .
  • and a plateau temperature between 60 and 70°C

    • TDS
    no associated data sheet
    -
    SDS
    no associated safety data sheet
    -

    Recommended products

    Similar products

    Chromatik Professional is part of the Dagoma Professional filament range. With different colours, different properties, different uses, this high quality filament is tested and approved for our Dagoma Professional 3D printers.