Filament specificities
Material
PLA
Grammage
750gr
Recommended tray
Non-textured PEI
Print speed
From 30 to 80mm/s
Extrusion temperature
From 210 to 260°C
Temperature of the tray
From 50 to 70°C
Pantone PLA 1.75mm Filament - 14-6330 TPG - Green
Pantone PLA 1.75mm Filament - 14-6330 TPG - Green
24.99€
In stock
This green coloured reel is available in 750g.
Features
Advice &
Precautions for use
Precautions for use
download
Use and implementation
Features
Brand
Pantone
Material
PLA
Difficulty in printing
easy
Filament colours
-
Grammage
750gr
Properties
-
Delivery time
-
Recommended nozzle(s)
0.4mm
Recommended nozzle type(s)
Steel
Recommended tray
Non-textured PEI
Type(s) of tray(s) supported
Buildgrip, Geckoteck COLD, Geckoteck HOT, PEI textured
recommended extrusion temperature
From 210 to 260°C
recommended tray temperature
From 50 to 70°C
Recommended print speed
From 30 to 80°mm/s
Retraction distance
From 3 to 4 mm
Flux filament % (%)
100
Shrinkage speed
30-40
Ventilation % of total
80 / 100
Advice &
Precautions for use
Precautions for use
We consider the printing of the Pantone PLA 1.75mm - 14-6330 TPG - Green Filament to be fairly easy.
We recommend using the non-textured PEI tray, but this filament can also be printed on Buildgrip, Geckoteck COLD, Geckoteck HOT, textured PEI tray(s).
For successful printing, we recommend :
download
TDS
no associated data sheet
-
SDS
no associated safety data sheet
-
Use and implementation
Use :
Pantone PLA filament is a range of filaments used for 3D printing that match the colours of the famous Pantone colour chart. The colours have been matched to eliminate guesswork and improve consistency and predictability in the use of the filament. It is used by designers, architects and other professionals, as well as anyone printing for aesthetic purposes, such as matching paint colours.
Recommended products
Similar products
The PANTONE® range of filament products is based on the PANTONE® colour chart.