From 30 to 80mm/s
From 210 to 260°C
Temperature of the tray
From 50 to 70°C
This grey coloured reel is available in 750g.
We consider the printing of the Pantone PLA 1.75mm - 18-0201 TPG - Grey Filament to be rather easy.
We recommend using the non-textured PEI tray, but this filament can also be printed on Buildgrip, Geckoteck COLD, Geckoteck HOT, textured PEI tray(s).
For successful printing, we recommend :